Assign Menu

This menu gives you all available options for an Executor.

Button and Fader Assignment

Size of Executor

Default Button and Fader Assignment

• Load from default

• Save as default

• Apply to all Exec.

Playback Options

• Auto start - When enabled, the sequence will start when Master is moved from zero

• Auto stop - When enabled, the sequence will release when Master is moved to zero

• Auto Fix - When enabled, the sequence will be fixed on that fader once it's active until it gets released

• Swop Protect - When enabled, the sequence will be protected against the Swop function

• A/B Xfade

• Normal Trigger/Trigger is GO - Toggles from normal trigger to triggered by Go (not executing any follow and timed triggers)

• HTP dimmer/LTP dimmer - Toggles the behaviour of dimmer channels in the sequence from "Last takes Precedence" to "Highest takes Precedence"

• Kill Protect - When enabled, the sequence will be protected against the Kill function

Move in Black Options

• MIB Always

• MIB Never

• Auto PrePos

Cuelist

• Non-tracking/Tracking - Tracking will keep values changed from the beginning of the cuelist when you call a cue. Non-tracking will call only the changed values in the current cue.

Restart Options

• Restart with first cue/Restart with actual cue/Restart with next cue - Restart with first cue will start the cue from the beginning whenever the cue is released and started again (default). Restart with actual cue will start the cuelist from the last place is was released. Restart with next cue will start with the next cue in the cuelist from where it was released.

• Track from last/Release from last

Loops

• Normal/Breaking GO

Priority Options

• Low/Normal/High

• Private Effects/Global Effects

• Off on overwritten - If enabled, when all the attributes this cue governs are overwritten by another or combination of cues, this executor will switch off. If not enables it will remain on regardless of what other cues call.

Default Options

• Load from default - This will load the layout currently saved as default and apply it to the current executor.

• Save as default - This will save the current xecutor layout as default. Any newly created executors will use this layout.

• Apply to all exec - This will assign the current executor layout to ALL executors of the same type (fader or button). This command will also switch off ALL executors of the same type (fader or button).

Master

• None/Pb1 through Pb8 - This will assign a Playback Master to the current executor. Playback masters can be assigned to any fader position under 'Special Master.' Playback masters function as Group masters and regulate dimmer channels contained in the executor.