NETWORK between NSP and onPC!

1. Use crossed ethernet cable

2. Check IP-Settings (192.168.0.XXX) The NSP and onPC must have unique addresses

3. Turn all PC firewalls off

4. NSP has to be in MA-Net mode If not (NSP in Artnet mode) change it on the NSP itself.

5. UPDATE the NSP software from your PC (note that you maybe have to go through several software versions (Check MAlighting downloading section for information))

6. Start a session

Important note!

Sometimes problems can occur when using a crossed cable. Something with the buffer on the ethernetcard being filled up...

The recomendation would always be to use a switch between different stations in a network.